themed image
 

Geospect Instrument

NEW Geospect ML-10 IR

NEW Geospect ML-10 CC

Mudlogging Trailers For Sale

 - Many to choose from

 


 

Frequently Asked Questions?

Try our FAQ search!

Table of Contents

  1. What is Geospect?  
  2. Is Geospect easy to learn?
  3. What information is displayed on the screen?
  4. How are the data recorded and exported?
  5. Is there a high gas alarm?
  6. Is Geospect easy to install on a mudlogging unit??
  7. Does Geospect take up much space on a mudlogging unit?

What is Geospect?

The Geospect ML-09 is a mudlogging system that takes full advantage of today’s technology. It has a built in Gas detector, depth system, flow panel, sample pump, and data acquisition system. Gas is automatically lagged using our simulated pump stroke system. Data is conveniently displayed on screens that are configured for either "minutes per foot" or "feet per hour." Data files are exported to spreadsheet format for easy transfer to a log-plotting program. 


Back to Top

Is Geospect easy to learn?

The software was so carefully thought out so that even someone new to mudlogging can easily catch on, and easy to rig up. Pertinent information is always calculated and in front of the mud logger at all times. There is a simple to understand operating manual installed on the computer’s desktop.

Back to Top

What information is displayed on the screen?

The following information is displayed at all times: Depth, gas, estimated TVD depth, current ROP, ROP 5’ average, lag depth (depth from which current sample came from), Bottoms up strokes, simulated drill and lag strokes, drill rate curve, and gas curve.

Back to Top

How are the data recorded and exported?

There are several data files that can be exported. They are as follows: ROP 1’ intervals in minutes per foot, ROP 5’ average in minutes per foot, ROP 1’ intervals in feet per hour, ROP 5’ average in feet per hour, Lagged gas 1’ intervals, lagged gas 5’ intervals, TVD ROP, Gas log (gas is recorded with a time and date stamp at user specified intervals).

Back to Top

Is there a high gas alarm?

Geospect not only has a high gas alarm; It also has high/low alarms for virtually any parameter that Geospect monitors.

Back to Top

Is Geospect easy to install on a mud logging unit?

All lines are clearly labeled so that there should be no doubt to where everything goes. The unit can set down below or on top or even next to a counter or desk and the system is plugged into the computer with a single USB connection.

Back to Top

Does Geospect take up much space on a mud logging unit?

The Geospect ML-08-CC our largest unit is 20 inches square and 10 inches tall. Compared to standard mudlogging equipment A Geospect system leaves a very small footprint.
Back to Top

 


News

 

 

Geospect Software